Inspection: Radial Clearance Of Rocker (Roller); Inspection: Clearance Between Rocker Shaft And Bushing; Replace Of Rocker Bushing - Mitsubishi 6M60-TL Service Manual

Inspection procedure

Inspection: Radial clearance of rocker (roller)

• If the measurement deviates from the standard value, replace
the defective part(s).

Inspection: Clearance between rocker shaft and bushing

• If the measurement exceeds the limit, replace the bushing.

Replace of rocker bushing

[Removal]
[Installation]
• Assemble the bushing onto the rocker such that the oil holes are
aligned as shown in the illustration.
• After assembly, recheck the clearance.
• If the measurement is less than the standard value, ream the
bushing.
11
11-21