Mitsubishi 6M60-TL Service Manual page 167

1.3 Injector
• In accordance with electrical signals from the engine electronic control unit, each injector supplies high-pressure
fuel from the common rail to the relevant combustion chamber of the engine at the optimal timing and in the opti-
mal quantity.
• The injector is divided into the control section and the injector section.
• The control section consists of the control chamber, magnet, spring, valve body, valve ball, pressure pin, com-
mand piston, and orifice plate. The pressure pin is located between the control section and the injection sec-
tion.
• The injection section consists of the nozzle body, nozzle needle, nozzle spring, and retaining nut.
13E
13E-9