Mitsubishi 6M60-TL Service Manual page 99

Service standards (Unit: mm)
Location
– Backlash between gears
Clearance between No. 1 idler shaft and No. 1 idler
1, 2
gear bushing
3, 10 Idler gear end play
Clearance between No. 2 idler gear bushing and No. 2
9, 11
idler shaft
Tightening torque (Unit: N·m {kgf·m})
Mark
Bolt (No.1 idler gear mounting)
Nut (collar mounting)
No. 2 idler bolt
Lubricant and/or sealant
Mark
O-ring
Special tools (Unit: mm)
Mark
Gear puller
Idler gear push-puller
A B
φ 37 φ 40
No. 2 idler shaft puller
A
×
M12 1.25 M10
Maintenance item
No. 1 idler gear and air
compressor gear
No. 1 idler gear and No. 2
idler gear
No. 1 idler gear and crank-
shaft gear
Parts to be tightened
Points of application
Tool name and shape
B
×
1.5
Standard value
0.08 to 0.15
0.08 to 0.15
0.08 to 0.14
0.01 to 0.05
0.05 to 0.15
0.01 to 0.05
Tightening torque
88 {9}
82 {8.4}
95 {9.7}
Specified lubricant and/or sealant
Engine oil
Part No.
MH061326 Removal of No. 1 idler shaft and gear
Removal and installation of No. 1 and
MH062601
No. 2 idler gear bushings
MH062562 Removal of No. 2 idler gear shaft
11
Limit Remedy
0.35 Replace
0.35 Replace
0.35 Replace
0.2 Replace
0.3 Replace
0.2 Replace
Remarks
–
–
–
Quantity
As required
Application
11-63