Mitsubishi 6M60-TL Service Manual page 186

TROUBLESHOOTING
E-15: Flow Limiter - Cylinder1 (warning lamp flashes: 71) P1240
Generation condition
Recoverability
Control effected by electronic control unit
Service data
Inspection
Other
E-16: Flow Limiter - Cylinder2 (warning lamp flashes: 72) P1241
Generation condition
Recoverability
Control effected by electronic control unit
Service data
Inspection
Other
E-17: Flow Limiter - Cylinder3 (warning lamp flashes: 73) P1242
Generation condition
Recoverability
Control effected by electronic control unit
Service data
Inspection
Other
E-18: Flow Limiter - Cylinder4 (warning lamp flashes: 74) P1243
Generation condition
Recoverability
Control effected by electronic control unit
Service data
Inspection
Other
E-19: Flow Limiter - Cylinder5 (warning lamp flashes: 75) P1244
Generation condition
Recoverability
Control effected by electronic control unit
Service data
Inspection
Other
E-20: Flow Limiter - Cylinder6 (warning lamp flashes: 76) P1245
Generation condition
Recoverability
Control effected by electronic control unit
Service data
Inspection
Other
13E-28
Inter-cylinder injection amount correction value (FCCB) is higher than standard
value and fluctuation in engine speed is greater than standard value.
System recovers if signal becomes normal with starter switch in ON position.
FCCB learning is disabled.
43: Flow Limiter (#1)
• Flow damper (Have work performed by DENSO Service Station.)
Inter-cylinder injection amount correction value (FCCB) is higher than standard
value and fluctuation in engine speed is greater than standard value.
System recovers if signal becomes normal with starter switch in ON position.
FCCB learning is disabled.
44: Flow Limiter (#2)
• Flow damper (Have work performed by DENSO Service Station.)
Inter-cylinder injection amount correction value (FCCB) is higher than standard
value and fluctuation in engine speed is greater than standard value.
System recovers if signal becomes normal with starter switch in ON position.
FCCB learning is disabled.
45: Flow Limiter (#3)
• Flow damper (Have work performed by DENSO Service Station.)
Inter-cylinder injection amount correction value (FCCB) is higher than standard
value and fluctuation in engine speed is greater than standard value.
System recovers if signal becomes normal with starter switch in ON position.
FCCB learning is disabled.
46: Flow Limiter (#4)
• Flow damper (Have work performed by DENSO Service Station.)
Inter-cylinder injection amount correction value (FCCB) is higher than standard
value and fluctuation in engine speed is greater than standard value.
System recovers if signal becomes normal with starter switch in ON position.
FCCB learning is disabled.
47: Flow Limiter (#5)
• Flow damper (Have work performed by DENSO Service Station.)
Inter-cylinder injection amount correction value (FCCB) is higher than standard
value and fluctuation in engine speed is greater than standard value.
System recovers if signal becomes normal with starter switch in ON position.
FCCB learning is disabled.
48: Flow Limiter (#6)
• Flow damper (Have work performed by DENSO Service Station.)