Installation: No. 2 Idler Shaft; Installation: No. 1 Idler Gear - Mitsubishi 6M60-TL Service Manual

TIMING GEARS
11-66

Installation: No. 2 idler shaft

• Install the No. 2 idler shaft onto the crankcase ensuring that the
boss of the shaft faces down.

Installation: No. 1 idler gear

• Install the No. 1 idler gear such that the alignment mark "2" on
the gear is aligned with the alignment mark "2 2" on the air com-
pressor gear.
• When installing the No. 1 idler gear, also ensure that the align-
ment mark "1 1" on the gear is aligned with the alignment mark
"1" on the crankshaft gear.