Dhw Frost Protection; Factory Acvmax Settings - TriangleTube PRESTIGE Excellence 110 Installation & Maintenance Manual

CHAPTER 3 - WATER HEATER START-UP
3.5.

DHW Frost Protection

The Indirect Water Heater (IDWH) Sensor used in the
Prestige Excellence provides a Frost Protection feature
to the water heater. The Frost Protection feature is de-
signed to protect the Excellence water heater from a
potential freeze up. Frost Protection will generate a
DHW call once the IDWH temperature falls below 42º
F [6ºC]. Once Frost Protection is activated, the internal
circulator and diverter valve will direct water flow to the
water heater and the burner will fire. Frost Protection
will end once the IDWH temperature is raised to 60ºF
[16ºC]. This feature is always active and cannot be dis-
abled. Frost Protection is still active even if DHW opera-
tion has been disabled.
3.6.

Factory ACVMax Settings

DHW SETTING
DHW Operation
Demand Type
DHW Boiler Setpoint
DHW Setpoint
DHW On Differential
DHW Storage Adder
DHW Post Pump Time
DHW Priority Timeout
DHW Priority
DHW Call Blocking
DHW to CH Call Blocking
Antilegionella Function
12
FACTORY MINIMUM
DEFAULT SETTING
Enabled
Sensor
168°F [76°C] 96°F [35°C]
140°F [60°C] 68°F [20°C]
6°F [3°C] 4°F [2°C]
28°F [15°C] 10°F [5°C]
2 Minutes Off
Off Off
Enabled
0 Minute 0 Minute
1 Minute 0 Minute
Enabled
MAXIMUM
EZ SETUP RESET
SETTING
188°F [87°C] 3
168°F [75°C] 3
18°F [10°C]
54°F [30°C]
30 Minutes
120 Minutes 3
30 Minutes
30 Minutes
Enabled
INSTALLER RESET
3
3
3
3
3
3
3
3
3
3
Disabled