Monthly Maintenance - Precor TRM 800 Series Assembling And Maintaining Manual

62

Monthly Maintenance

Perform the following maintenance tasks every month:
1.
2. Inspect the running bed and belt for wear.
3. Clean the treadmill's frame using a cloth moistened with
4. Use water and a soft nylon scrub brush to clean the outer
5. Wipe the exterior of the console with a damp sponge or
6. Clean the touchscreen using a soft, lint-free cloth
7. Remove the front cover and remove any lint or debris,
8. Vacuum out any debris, being careful not to bring the
9. Clean and lubricate the lift motor screw with an approved
10. Check all fasteners for proper tightness and torque.
11. Replace all covers.
12. Verify that the unit sits squarely on the floor. All of its feet
Assembling and Maintaining TRM 800-Series Treadmills
Turn off the power switch or circuit breaker, then unplug
the unit from the wall outlet.
water or an approved cleaner.
surface of the running belt.
soft cloth, and dry with a clean towel. Keep water away
from electronic components to prevent electrical shock or
damage.
dampened with a 91% isopropyl alcohol solution (either
as sold or diluted with an equal amount of water).
being careful not to damage the fan.
vacuum cleaner nozzle too close to any circuit board
(unless your vacuum cleaner is protected against static
buildup).
grease such as SuperLube® with Teflon® or Mobil 1®
synthetic grease.
should be touching the floor and the unit should not rock
or wobble when in use. If not, re-level it as described in
Leveling the Unit.