Door Lock Controlled with Dry Contact
Note:
1.
The external power supply must be used according
to the lock.
2.
The inside relay contact is restricted to AC or DC
24V/1A.
3.
The jumper must be taken off before connecting.
4.
Set the Unlock Mode of Monitor for different
lock types.
• Power-on-to-unlock type: Unlock Mode=0 (by
default - monitor code 8010)
• Power-off-to-unlock type: Unlock Mode = 1
- monitor code 8011
Unlock parameter setting(set in monitor)
1.Touch
icon on
main menu page.
Note:
1.must connect CDV96KP correctly before setting.
2.the parameter will be saved in CDV96KP automatically,so you need only set on one monitor.
3.the above diagram is fit for icon menu series monitors only, to text menu series monitors,please refer to
the corresponding user manual.
About
Local Address
00.00
Video Standard
AUTO
System Verson
00.01.00
Display Driver
1.0
Front
1.0
UI
1.0
2.Touch
UNLOCK
button and hold for 2s.
-
-
4
Connect one lock
Take off the Jumper
BUS
PL
S +
S-
POWER
SUPPLY
INSTALLER SETUP
_
3.A digital keypad will be
shown.
LOCK
123