CDVI CDV96KP User Manual page 14

Input the master code.
(Default: [ ] +[#])
5.Setting the unlock mode
(Default 0(opened))
Input the setting code.
04+#
The color of key indicator
Beep+, Beep
(yellow)
0/1
Inputting of code
(ex.: 1)
range:0:(open)/1:(close)
1+#
The color of key indicator
Beep+
(green white)
- When the "
* cancel" key is pressed, the indicator will show its standby color, the buzzer beeps, and the system
exits the setting mode.
- When there isn't any operation in 10s, the indicator will show its standby color, the buzzer beeps, and the system
exits the setting mode.
- When setting failure, the color of key indicator will turn red , the buzzer beeps.
- The unlock mode can be set on
both monitor and door station,
and the valid value is the number
you set last time.
6.Setting operation tone
(Default ON)
Input the setting code.
05+#
The color of key indicator
Beep+, Beep
(yellow)
0/1
Inputting of code
(ex.: 1)
range:0:(on)/1:(off)
1+#
The color of key indicator
Beep+
(green white)
- When the operation tone is
set to 0,pressing the digital
keypad will sent out a sound
of beep.
- When the operation tone is
set to 1,pressing the digital
keypad will blink one time.
-
The color of key indicator
7.Reset code setting
Input the setting code.
06+#
The color of key indicator
Beep+, Beep
(yellow)
Inputting of code
1234+#
The color of key indicator
(green white) Beep+
- Cancel all the passwords except
the master code.
- Restore the master code to
default value(1,2,3,4)
12-
(white)
Beep+, Beep
*
8. &# function setting
(Default Normal)
Input the setting code.
07+#
The color of key indicator
(yellow)
0/1
Inputting of code
range:0:(normal)/1:(reverse)
1+#
The color of key indicator
(green white)
The color of
key indicator
(The color
of standby)
- When the item is set to 0,press
the button to cancel the input,
*
and press the # button to confirm
the input.
- When the item is set to 1,press
the # button to cancel the input,
and press the button to confirm
*
the input .
Beep+, Beep
(ex.: 1)
Beep+
Beep, Beep+