Placing Name Label
Using a screwdriver remove the fixing screw, pull forward the panel and slide in the name plate.
3.Terminal Descriptions
Lock Control Jumper
S -
P L S +
B U S
Main Connect Port
• Lock Control Jumper: To select the lock type.
• Main Connect Port: To connect the bus line and
the electronic locks.
• BUS: Connect to the bus line, no polarity.
• PL: External lock power input.
positive(power +).
• S+: Lock power(+) output.
• S-: Lock power(-) output
supply for the locks, the S- will not be connected).
-2-
(if using the external power