Changing Non-Numeric Set Values - Omron ZX-LDA11 Operation Manuals

FUN (Function) Mode
4-5-3

Changing Non-numeric Set Values

The following procedure is used to change set values other than numeric
values for the functions that require changing.
Example: Changing the Hold Mode
Press either the UP or
DOWN Key.
Change the function to the one that
requires setting using the procedure
given in 4-5-2 Changing the Function.
Press either the UP or DOWN Key to
start the setting change.
The current set value will flash on the
sub-display.
Section 4-5
125