Inputting Threshold Values Directly - Omron ZX-LDA11 Operation Manuals

Through-beam Sensor Heads: T Mode Functions
3-7-2

Inputting Threshold Values Directly

The threshold values can be directly input into the sub-display.
Note: Generally, any value can be input. The judgement outputs, however, will
not operate for thresholds that are outside the measurement range. Also,
the decimal point cannot be changed.
78
If an error occurs when inputting a threshold value, refer
to 4-4-2 Inputting Threshold Values Directly and 5-2-3
Unable to Set Threshold Values.
Section 3-7