Connecting The Speaker Cable; Adjusting The Brightness Of The Display - Roland Vima RK-500 Owner's Manual

Connecting the Speaker Cable

1.
Plug the speaker cable extending from the
VIMA's stand into the SPEAKER connector
located at the back of the VIMA's bottom
panel.
fig.SpeakerCable.eps
SPEAKER
Connector
Pay attention to the shape of the speaker cable's
NOTE
connector, and insert it until you hear it click securely
into place.
Do not insert your hand into the hole located under
NOTE
the speaker box. Doing so may cause injury.
Speaker Cable
Adjusting the Brightness of
the Display
You can adjust the brightness of the VIMA's display.
fig.Contrast.eps
1.
To adjust the brightness, turn the [DISPLAY
BRIGHTNESS] knob located at the right of the
VIMA's display.
Cautions Regarding the LCD Display
• In order to provide the highest possible image quality, the
VIMA uses a TFT liquid crystal display. Due to the nature
of a TFT liquid crystal display, the screen may contain
pixels that fail to light or that remain constantly lit, but
please be aware that this is not a malfunction or defect.
• The brightness may be affected by the temperature.
Before You Play
27