Count Settings; Selecting The Timing At Which The Count Is Sounded (Count Mode); Selecting The Count-In Sound (Count In Sound) - Roland Vima RK-500 Owner's Manual

Count Settings

1.
Access the main screen.
If the main screen is not shown, press the [EXIT] button
several times to access the main screen.
fig.d-MainScreen.eps
2.
In the main screen, touch <Menu>.
The menu screen appears.
ig.d-Function-01-1.eps
3.
Touch <Count>.
A screen like the following appears.
fig.d-Function-11.eps
4.
To change the setting, touch
item you want to specify.
5.
Press the [EXIT] button when you're finished
making settings.
Selecting the Timing at which the Count
is Sounded (Count Mode)
You can specify how the count will be sounded if you've
pressed the [COUNT] button to make it light.
A "count-in" is when a count is sounded before the song
begins.
A "count-down" is when a count is sounded at the end of the
song's introduction (before you begin playing the keyboard). If
you will be playing along with the song, sounding a count will
help you match the timing of your playing with the song.
Item
Count In
Countdown
Count In/
down
Selecting the Count-in Sound
(Count In Sound)
You can select the sound that will be used to play the count-in.
If you've selected "Count In" or "Count In/down" as the count
setting (preceding item), the count will be played using the
sound you selected here.
Stick, Click, Electronic, Voice(Japanese), Voice(English),
Wood Block, Triangle, Hand Clap, Animal
for the
Setting
A count will sound before the song plays.
A count will sound at the end of the song's
introduction
A count will sound before the song plays, and
also at the end of the song's introduction
Item
Settings
125