Before You Play; Getting Ready To Play; Connecting The Speaker Cable; Connecting The Pedal Cord - Roland HP307 Owner's Manual

Before You Play

Getting Ready to Play

Connecting the Speaker Cable

Plug the speaker cable extending from the stand into the
SPEAKER connector located at the rear of the HP307's
bottom panel. Pay attention to the shape of the speaker
cable's connector, and insert it until you hear it click securely
into place.
Speaker terminal

Connecting the Pedal Cord

Plug the pedal cord extending from the stand into the Pedal
connector located at the rear of the HP307's bottom panel.
14
Speaker cable
Pedal connector
Pedal cord

Connecting the Power Cord

Check before you connect the power cord.
• Make sure that the [Power] switch is off (p. 16).
• Make sure that the [Volume] slider is minimized (p. 17).
1.
Connect the included power cord to the AC Inlet
located at the rear of the bottom panel.
2.
Plug the other end of the power cord into an AC
outlet.
You must use the power cord included with the HP307.
AC Inlet
To AC Outlet
Power cord