Locking The External Memory Connector Cover - Roland Vima RK-500 Owner's Manual

Press the front of the external memory connector cover to close it.
3.
NOTE

Locking the External Memory Connector Cover

You can lock the external memory connector cover to prevent theft of the USB memory
(sold separately) connected to the external memory connector.
1. Connect the USB memory (refer to previous section).
Press on the front part of the external memory connector cover to close the
2.
cover.
Using a screwdriver, remove the anti-theft lock screws (two screws) to the
3.
side of the external memory connector cover.
4. Secure the anti-theft lock with the screws as shown below.
NOTE
You must leave the external memory connector cover closed except while inserting or
removing USB memory.
Anti-theft Lock
Be sure to replace removed screws when securing the anti-theft lock.
Screws
Anti-theft Lock
Screws
Saving Your Performance
105