Connecting The Speaker Cable (At-900C); Opening/Closing The Lid (At-900) - Roland AT900 Music Atelier Owner's Manual

Before You Start Playing
Connecting the Speaker Cable
(AT-900C)
1.
Plug the speaker cable extending from the
stand into the Speaker connector located at
the rear of the AT-900C's bottom panel.
Pay attention to the shape of the speaker cable's
connector, and insert it until you hear it click securely
into place.
22
Speaker
Cable
Opening/Closing the Lid
(AT-900)
fig.00-22.eps
1.
To open the lid, hold handles with both hands
and lift it straight up. Then, slide it to the rear.
2.
To close the lid, slowly pull it forward until it
stops. Then, gently lower it into place.
Be careful not to get your fingers caught when opening or
closing the lid. Adult supervision is recommended when
NOTE
small children are going to be using the instrument.
To prevent accidents, be sure to close the lid before moving
NOTE
the organ.
Make sure you don't have anything (such as sheet music) on
NOTE
the keyboard when you close the lid.