Before You Play; Getting Ready To Play; Connecting The Power Cord; Turning The Power On/Off - Roland Vima RK-500 Owner's Manual

Before You Play

Getting Ready to Play

Connecting the Power Cord

1.
Make sure that the [Power On] switch located
at the left side of the keyboard is off (in the
upward position).
fig.PowerOn.eps
Upward
Power On
position
OFF
2.
Connect the included power cord to the AC
INLET located at the rear of the bottom panel.
fig.ACcord.eps
AC INLET
3.
Plug the other end of the power cord into an
AC outlet.
You must use the power cord included with the
NOTE
VIMA.
24
AC Outlet
Power Cord

Turning the Power On/Off

Once you've got everything connected properly, you
NOTE
can turn on the power using the following procedure.
If you fail to perform these steps in the correct order,
you risk causing a malfunction or damaging your
speakers.
Turning the Power On
1.
Turn the [VOLUME] knob all the way toward
the left to minimize the volume.
fig.VolumeMin.eps
2.
Press the [Power On] switch.
fig.PowerOn.eps
Lower
Power On
position
ON
The power will turn on, and after several images have
appeared in the VIMA's display, the main screen will
appear.
After a brief interval, you'll be able to produce sounds
by playing the keyboard.
→ Main screen (p. 23)
Due to a circuitry protection feature, this unit requires
NOTE
a few moments after power is turned on before it is
ready for normal operation.
3.
Use the [VOLUME] knob to adjust the volume
(p. 25).