Creating A Rhythm Group (Rhythm Group Edit); Saving The Rhythm Group You Have Created (Write) - Roland Fantom-Xa Owner's Manual

Creating a Rhythm Group
(Rhythm Group Edit)
Not only can you use the prepared internal Rhythm Groups that
determine how rhythm are played, but you can also create them as
well. This way, you can enjoy performing your own original rhythm
group.
1.
Hold down [SHIFT] and press [RHYTHM].
2.
Press [F1 (RHY GRP)].
3.
Use the VALUE dial or [INC] [DEC] to select a rhythm group
you want to edit.
4.
Press [F5 (EDIT)].
The RHY GRP EDIT screen appears.
fig.RhyGrpEdit
5.
Press to select the parameter.
6.
Use the VALUE dial or [INC] [DEC] to set the value.
Parameter Value
(PAD) 1–9
Mode Off, Note,
Pattern
When Mode is set to "Note"
Note C - –G9
Velocity FIX (127),
1–127
When Mode is set to "Pattern"
Ptn U001–256,
P001–256
Velocity FIX (127),
1–127
Rhy USER:
001–032
PRST:
001–036
GM:
001–009
CARD:
001–032
EXP:
001–
7.
When you have finished, press [F5 (EXIT)].
Explanation
Select the pad for which you want
to make settings.
You can also choose the pad that
you want to set by pressing that
pad.
Specifies whether a rhythm tone or
a rhythm pattern number will be as-
signed to the pad.
Specifies the note number that will
sound when you press the pad.
Specifies the strength of the sound
heard when you press the pad.
Specifies the pattern number that
will sound when you press the pad.
Specifies the velocity of the rhythm
pattern.
Specifies which rhythm set will be
used.
Saving the Rhythm Group
You Have Created (Write)
The Rhythm Groups you create are temporary; they are deleted as
soon as you turn off the power or select some other Group. You can
store 32 Rhythm Groups in the User memory.
Rhythm group settings are saved as independent data, not
as part of the data for each patch. The settings in Patch mode,
it is not possible to save rhythm group settings.
It can be saved to individual in Performance mode. If you
want to save your settings, press [WRITE] and save the
performance.
1.
In the RHYTHM GROUP screen, confirm that the current
Rhythm Group is the one you want to save.
2.
Press [F6 (WRITE)].
The RHYTHM GROUP NAME screen appears.
fig.RhyGrpName
3.
Assign a name to the Rhythm Group.
For details on assigning names, refer to p. 28.
4.
When you have finished inputting the name, press [F6
(WRITE)].
A screen will appear, allowing you to select the write-
destination group.
fig.RhyGrpWrite
5.
Use the VALUE dial, [INC] [DEC], or
write destination.
6.
Press [F6 (WRITE)].
A message will ask you for confirmation.
7.
To save the Rhythm Group, press [F6 (EXEC)].
* To cancel, press [F5 (CANCEL)].
Never switch off the Fantom-Xa while data is being saved.
Playing Rhythms
to select the
99