Page 2
This booklet requires Fantom-X O.S. Version 2 or higher. To learn about the latest Fantom-X software, visit www.RolandUS. There are two different ways to make a CD of your Fantom-X music: com, or call Roland U.S. Product Support at 323-890-3745.
Page 3
• standalone CD recorder—that records music onto a To get the stereo sound of your Fantom-X to the CD recorder, recordable CD disc as you play back the music on the connect the two devices using one or two audio cables. The Fantom-X.
Page 4
Set the CD recorder to begin recording, and then start playing Fantom-X’s DIGITAL OUT jack to the CD your Fantom-X song. When the song is finished, pause or recorder’s coaxial digital input jack. stop the CD recorder. At this point, you can record additional Fantom-X songs onto the CD or “finalize”...
Page 5
4. Press 6 and/or 5 to select the song and press F8 (Load). • Audio CD-creation software 5. The Fantom-X asks if you’re sure you want to load the selected song—press F8 (Exec) to proceed. A Word About Audio CD-Creation Software 2.
Page 6
Be sure to store any unsaved data such as samples, user patches, songs, audio file is stored—the Fantom-X’s display shows etc., before powering off the Fantom-X. If you don’t know how to do this, “Connected” when USB communication is established.
Page 7
Once the USB connection has been cancelled, you can files that are residing in your Fantom-X. Because of this, don’t use your safely disconnect the USB cable from the Fantom-X and the computer to move, rename, or delete files located in the Fantom-X drive.
Page 8
Fantom-X data in the same way as described earlier. Consult your card reader’s documentation for info on its proper usage. Since you’ll want to reuse the card on the Fantom-X, don’t use your computer to move, rename, or delete files on the card.