Roland Fantom-Xa Owner's Manual page 84

Modifying the Sound in Real Time
ASSIGNABLE Switch Settings
1.
Hold down [SHIFT] and press one of the ASSIGNABLE SW
button.
A screen like the following appears.
fig.RealtimeSw
2.
Press to select the parameter.
3.
Use the VALUE dial or [INC] [DEC] to make the setting.
Parameter Value
Switch 1/2 Assign TRANSPOSE DOWN,
TRANSPOSE UP,
TAP TEMPO,
MONO/POLY,
PORTAMENTO,
HOLD,
MFX1–3,
CHORUS SW,
REVERB SW,
MASTERING SW,
LOOP,
RHY START/STOP
84
4.
5.
Explanation
Functions that will be controlled by the [
TRANSPOSE DOWN: Lowers the key range in semitones (up to 5 semitones lower).
TRANSPOSE UP: Raises the key range in semitones (up to 6 semitones higher).
TAP TEMPO: Tap tempo (a tempo specified by the interval at which you press the button)
MONO/POLY: Pressed to toggle between polyphonic (POLY) and monophonic (MONO)
play of a patch.
PORTAMENTO: Portamento On/Off
HOLD: Hold play On/Off
MFX1–3 SW: Multi-effect 1–3 switch
CHORUS SW: Chorus switch
REVERB SW: Reverb switch
MASTERING SW: Mastering switch
LOOP: Loop play On/Off
RHY START/STOP: Rhythm pattern playback On/Off
If you want to save the settings, press [F6 (WRITE)].
Press [EXIT] to return to the previous screen.
Realtime controller settings are saved independently for each
performance as part of the performance settings. This lets you
create performances that make effective use of controller
settings.
If Patch mode is selected, assignable switches are available
when the keyboard part is selected.
]/[ ] buttons