Roland Fantom-Xa Owner's Manual page 63

[F2 (TVF ENV)]
Parameter Value
F-Env Depth -63– +63
F-Env V-Curve FIX, 1–7
F-Env V-Sens -63– +63
F-Env T1 V-Sens -63– +63
F-Env T4 V-Sens -63– +63
F-Env Time 1–4 0–127
F-Env Level 0–4 0–127
TVF Envelope
T1
Cutoff
Frequency
L0
Note on
Explanation
Depth of the TVF envelope
Higher settings will cause the TVF envelope to produce greater change. Negative (-) settings will invert the
shape of the envelope.
Curve that determines how keyboard playing dynamics (velocity) will affect the TVF envelope
Set this to "FIX" if you don't want the TVF Envelope to be affected by the keyboard velocity.
1 2
Specifies how keyboard playing dynamics will affect the depth of the TVF envelope.
Positive (+) settings will cause the TVF envelope to have a greater effect for strongly played notes, and
negative (-) settings will cause the effect to be less.
This allows keyboard dynamics to affect the T1 of the TVF envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+) value.
Use this parameter when you want key release speed to affect the T4 value of the TVF envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+) value.
TVF envelope times (T1–T4)
Higher settings will lengthen the time until the next cutoff frequency level is reached.
TVF envelope levels (L0–L4)
Specify how the cutoff frequency will change at each point, relative to the Cutoff Frequency value.
T2 T3
L2 L3
L1
Note off
3 4 5
T4
Time
L4
Creating a Rhythm Set
6 7
63