Environment Settings (Changing Instrument Settings); Save Meas. Data - Konica Minolta CR-20 Instruction Manual

Environment Settings (Changing Instrument Settings)

Save Meas. Data

Measured data can be saved to the instrument.
1
Go to the "Setting" screen.
2
Click the check box to the left of "Save to Instrument".
Up to 1000 measurement data entries can be saved. In addition, this application
can be used to display data saved in the instrument in a list and to save the data
to the PC.
Also note that saved measurement data will be saved to the instrument's mass
storage folder and that the folders can be copied directly to the PC's hard drive
using drag-and-drop functionality.
Save destination folder: "DATA" folder inside the instrument's mass storage
folder ― Measurement date (yyyymmdd) folder
File name:
<Measurement example>
132648.csv (measurement hhmmss)
<Average example>
132648_A.csv (measurement hhmmss)
1 2
49