Table of Contents
Advertisement
SUPERSERVER 6027PR-HC1(R/TR/FR) USER'S MANUAL
1-3
Server Chassis Features
The SC827HQ+ is an proprietary form factor chassis designed to be used in a 2U
rackmount configuration. The following is a general outline of the main features.
System Power
The chassis includes dual high-efficiency 80-plus Platinum certified hot-plug power
supply modules, rated at 2000 Watts. Either module can be removed or replaced
without powering down the server.
SAS/SATA Subsystem
The SC827HQ+ supports up to twelve 3.5" hot-swap SAS/SATA drives in trays,
three for each node. These drives are hot-swappable units and are connected to a
backplane that provides power and control.
Front Control Panel
The chassis includes four front panels on the handles of the chassis that control
each of the systems. Each control panel provides system monitoring and control
for one server node. LEDs indicate system power, HDD activity, network activity,
system overheat and power supply failure. A main power button and a system reset
button are also included.
Cooling System
The chassis accepts four system fans powered from the backplane. If one of the
node drawers is removed, the other fans will continue to run.
Air Shrouds
The system includes four mylar air shrouds that direct the airflow where cooling is
needed on each serverboard. Always use the air shroud included with your chassis
on each serverboard.
Mounting Rails
The system includes a set of quick-release rails, and can be placed in a rack for
secure storage and use.
1-4
Advertisement
Table of Contents
