Table of Contents
Advertisement
1-3
Server Chassis Features
The SC825TQ-R740LPB is designed to be used in a 2U rackmount confi guration.
The following is a general outline of the main features of the SC825TQ-R740LPB
server chassis.
System Power
The SC825TQ-R740LPB features a redundant 740W power supply composed of
two separate power modules. This power redundancy feature allows you to replace
a failed power supply module without shutting down the system.
Hard Drive Subsystem
The chassis was designed to support eight hot-swap SATA hard drives.
Front Control Panel
The control panel on the SC825TQ-R740LPB provides you with system monitoring
and control. LEDs indicate system power, HDD activity, network activity, system
information and power supply failure. A main power button and a system reset but-
ton are also included. In addition, two optional USB ports may be incorporated into
the control panel to provide front side USB access.
Cooling System
The SC825TQ-R740LPB chassis has an innovative cooling design that includes
three 8-cm hot-plug system cooling fans located in the middle section of the chas-
sis. Fan speed may be controlled via IPMI. The power supply module also includes
a cooling fan.
Chapter 1: Introduction
1-3
Advertisement
Table of Contents
