Bmc Network Configuration - Supero SuperServer 6027PR-HC1R User Manual

Table of Contents

Advertisement

When SEL is Full
This feature allows the user to decide what the BIOS should do when the system
event log is full. Select Erase Immediately to erase all events in the log when the
system event log is full. The options are Do Nothing and Erase Immediately.
Custom EFI Logging Options
Log EFI Status Codes
Select Enabled to log EFI (Extensible Firmware Interface) Status Codes, Error
Codes or Progress Codes. The options are Enabled and Disabled.
Note: After making changes on a setting, be sure to reboot the system for
the changes to take effect.

BMC Network Configuration

LAN Channel 1: This feature allows the user to configure the settings for LAN1 Port.
IPMI LAN Selection
This feature displays the IPMI LAN Selection setting. The default setting is Failover.
IPMI Network Link Status
This feature displays the IPMI Network Link status. The default setting is Dedicated
LAN.
Update IPMI LAN Configuration
This feature allows the BIOS to implement any IP/MAC address changes at the next
system boot. If the option is set to Yes, any changes made to the settings below will
take effect when the system is rebooted. The options are No and Yes.
Configuration Address Source
This feature allows the user to select the source of the IP address for this computer.
If Static is selected, you will need to know the IP address of this computer and enter
it to the system manually in the field. If DHCP is selected, the BIOS will search for a
DHCP (Dynamic Host Configuration Protocol) server in the network that is attached
to and request the next available IP address for this computer. The options are
DHCP and Static. The following items are assigned IP addresses automatically if
DHCP is selected, or can be configured manually if Static is selected.
Update IPMI LAN Configuration
This feature allows the BIOS to implement any IP/MAC address changes at the next
system boot. If the option is set to Yes, any changes made to the settings below will
take effect when the system is rebooted. The options are No and Yes.
7-31
Chapter 7: BIOS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Superserver 6027pr-hc1trSuperserver 6027pr-hc1fr

Table of Contents