Table of Contents
Advertisement
SUPERSERVER 6027PR-HC1(R/TR/FR) USER'S MANUAL
1-2
Serverboard Features
In each of the four computing nodes lies an X9DRT-P/PT/PIBF, a dual processor
serverboard based on the Intel C602 chipset and designed to provide maximum
performance.
•
The 6027PR-HC1R uses the X9DRT-P serverboard with 1Gb network speed.
•
The 6027PR-HC1TR uses the X9DRT-PT serverboard with 10Gb network
speed.
•
The 6027PR-HC1FR uses the X9DRT-PIBF serverboard with Infiniband.
The sections below cover the main features. Refer to the Supermicro web site for
updated specifications and details. (see Figure 1-1 for a block diagram).
Processors
Each serverboard supports single or dual Intel Xeon E5-2600 series processors
(Socket R LGA 2011).
Memory
Each serverboard has sixteen DIMM slots.
•
Up to 1TB DDR3 ECC LRDIMM
•
Up to 512GB DDR3 ECC RDIMM
•
Up to 128GB DDR3 ECC/non-ECC UDIMM
Supported memory types are1866/1600/1333/1066/800MHz ECC SDRAM 72-bit,
240-pin gold-plated DIMMs. Accepted sizes are 1GB, 2GB, 4GB, 8GB, 16GB, 32GB,
and 64GB LRDIMM.
SAS
For each serverboard, a SAS3 LSI 3108 controller is integrated into the backplane
to provide three 12Gb/s ports. RAID 0, 1, 5 is supported and the SAS drives are
hot-swappable.
Note: Your operating system must have RAID support to enable the hotswap
capability and RAID function of the SAS drives.
Note: In order to support the LSI RAID Controllers, both CPU sockets must be
populated.
1-2
Advertisement
Table of Contents
