Adding Pci Expansion Cards - Supero SuperServer 6027PR-HC1R User Manual

Installing LRDIMM (ECC) Memory
Intel E5-2600(V2) Series Processor LRDIMM Memory
Ranks
Per DIMM
& Data
Width
QRx4
(DDP)
QRx8 (P)
Note: For detailed information on memory support and updates, please refer to the
SMC Recommended Memory List posted on our website at http://www.supermicro.
com/support/resources/mem.cfm.
Other Important Notes and Restrictions
•
For the memory modules to work properly, please install DIMM modules of the
same type, same speed and same operating frequency on the serverboard.
Mixing of RDIMMs, UDIMMs or LRDIMMs is not allowed. Do not install both
ECC and Non-ECC memory modules on the same serverboard.
•
Using DDR3 DIMMs with different operating frequencies is not allowed. All
channels in a system will run at the lowest common frequency.
5-6

Adding PCI Expansion Cards

The server includes four pre-installed riser cards, one in each node. These riser
cards support low-profile PCI Express x16 cards. See Chapter 6 for installation
details.
Support
Memory Capacity
Per DIMM
(See the Note Below)
16GB 32GB
8GB 16GB
5-11
Chapter 5: Advanced Serverboard Setup
Speed (MT/s) and Voltage
Validated by Slot per Channel
(SPC) and DIMM Per Channel
(DPC)
1 Slot Per 2 Slots Per
Channel Channel
1DPC 1DPC and
1.35V 1.5V 1.35V
1066, 1066, 1066,
1333, 1333, 1333
1600 1600
1066, 1066, 1066,
1333, 1333, 1333
1600 1600
2DPC
1.5V
1066,
1333
1066,
1333