Table of Contents
Advertisement
Above 4G Decoding (Available if the system supports 64-bit PCI decoding)
Select Enabled to decode a PCI device that supports 64-bit in the space above 4G
Address. The options are Enabled and Disabled.
CPU1 Slot 1 PCI-E 3.0 x16 OPROM/ CPU1 Slot 2 PCI-E 3.0 x8 OPROM
Select Enabled to enable Option ROM support to boot the computer using a device
installed on the slot specified above. The options are Enabled and Disabled.
Onboard LAN Option ROM Select
Select iSCSI to use the iSCSI Option ROM to boot the computer using a network
device. Select PXE (Preboot Execution Environment) to use an PXE Option ROM
to boot the computer usin g a network device. The options are iSCSI and PXE.
Load Onboard LAN1 Option ROM, Load Onboard LAN2 Option ROM
Select Enabled to enable the onboard LAN1/LAN2 Option ROM. This is to boot
the computer using a network device. The default setting for LAN1 Option ROM is
Enabled, and the default setting for LAN2 Option ROM is Disabled.
VGA Priority
This feature allows the user to select the graphics adapter to be used as the primary
boot device. The options are Onboard and Offboard.
Network Stack
Select Enabled enable PXE (Preboot Execution Environment) or UEFI (Unified
Extensible Firmware Interface) for network stack support. The options are Enabled
and Disabled.
Super IO Configuration
Super IO Chip: This item displays the Super IO chip used in the motherboard.
Serial Port Attribute
Use this feature to select the attribute for this serial port. The options are COM/
SOL (Serial On LAN), and BMC.
COM Configuration
Serial Port
Select Enabled to enable a serial port specified by the user. The options are
Enabled and Disabled.
7-19
Chapter 7: BIOS
Advertisement
Table of Contents
