Table of Contents
Advertisement
SuperServer 6027PR-HC1(R/TR/FR) User's Manual
3-2
Control Panel Buttons
The chassis includes two push-buttons.
Power: The main power switch is used to apply or remove power from the power
supply to the server. Turning off system power with this button removes the main
power but maintains standby power. To perform many maintenance tasks, you must
unplug system before servicing.
Universal ID: Press this button to toggle the universal identifier LED. A blue light
on front and back help an operator find this server in a rack of many.
3-3
Control Panel LEDs
There are two LEDs that provide status information about the system.
NIC: Indicates network activity when flashing.
Information LED: Alerts operator of several states, as noted in the table below.
Status
Continuously on and red
Blinking red (1Hz)
Blinking red (0.25Hz)
Solid blue
Blinking blue
Information LED
An overheat condition has occured.
(This may be caused by cable congestion.)
Fan failure, check for an inoperative fan.
Power failure, check for a non-operational power supply.
Local UID has been activated. Use this function to locate
the server in a rack mount environment.
Remote UID is on. Use this function to identify the
server from a remote location.
3-2
Description
Advertisement
Table of Contents
