Super Io Configuration - Supero SuperServer E200-8B User Manual

SuperServer E200-8B User's Guide
in synchronizing multimedia streams, providing smooth playback and reducing
the dependency on other timestamp calculation devices, such as an x86 RDTSC
Instruction embedded in the CPU. The High Performance Event Timer is used
to replace the 8254 Programmable Interval Timer. The options are Enabled and
Disabled.
Boot Timer with HPET Timer (High Precision Event Timer)
Select Enabled to allow the Boot Timer to take the input from the High Precision
Time into calculation when calculating time events for the system. The options are
Enabled and Disabled.

Super IO Configuration


Super IO Chip NCT5104DSEC
 Serial Port 1 Configuration/Serial Port 2 Configuration/Serial Port 3
Configuration//Serial Port 4 Configuration
Serial Port
Select Enabled to enable the onboard serial port specified by the user. The
options are Enabled and Disabled.
Device Settings
This item displays the base I/O port address and the Interrupt Request address
of a serial port specified by the user.
Change Settings
This feature specifies the base I/O port address and the Interrupt Request
address of Serial Port 1, Serial Port 2, Serial Port 3, or Serial Port 4. Select
Auto to allow the BIOS to automatically assign the base I/O and IRQ address
to a serial port specified.
The options for Serial Port 1 are Auto, (IO=3F8h; IRQ=4), (IO=3F0h; IRQ=3,
4, 5, 6, 7, 10, 11, 12), (IO=3E0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), and (IO=3D0h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12).
The options for Serial Port 2 are Auto, (IO=2F8h; IRQ=4), (IO=3F0h; IRQ=3,
4, 5, 6, 7, 10, 11, 12), (IO=3E0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), and (IO=3D0h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12).
The options for Serial Port 3 are Auto, (IO=3E0h; IRQ=4), (IO=3F0h; IRQ=3,
4, 5, 6, 7, 10, 11, 12), (IO=3E0h; IRQ=3, 4, 5, 6, 7, 10, 11, 12), and (IO=3D0h;
IRQ=3, 4, 5, 6, 7, 10, 11, 12).
5-10