Paper Ribbons Installation - ELCOM Euro-150TE Flexy User Manual

Cash register characteristics
The „P" mode is used for programming all values and functions of the cash register.
Training mode has all the functions of the „R" mode (except deposits and withdrawals). The cash register
records for training mode the number of documents created and their turnover from the last performed daily
Z-report. Receipts printed out in this regime are labeled with the text "Training"..
„Standby". The cash register goes into power-saving mode when a determined time limit passes without any
activity. In power-saving mode the cash register has low energy consumption. The text „Standby" appears
on the display. All buttons, aside from the
saving mode is ended by pressing the

PAPER RIBBONS INSTALLATION

The Euro-150TE Flexy cash register uses one thermal paper ribbon whose width is 57 mm. The Euro-150TX
Flexy cash register uses two thermal paper ribbons whose width is 38 mm The ribbon serves for the printing
of customer receipt. The cash register keeps the control receipt in electronic form. for Euro-150TE Flexy
version and for Euro-150TX Flexy cash register keeps the control receipt in paper form
We recommend using only rolls of good quality paper with a maximum diameter of 55 mm. To ensure proper
cash register operation, it is important to be sure that the print is sufficiently saturated. If any problems occur,
contact your local authorized Euro-150TE/TX Flexy dealer.
Figure 2.4 – Installation of paper ribbon into the Euro-150TE/TX Flexy
18
P-mode
PLU
MAIN MENU
T-mode
Standby

(ON/OFF) button are non-functional in this mode. The power-

(ON/OFF) key.