Jumping To A Specific Product Item; System Parameters - ELCOM Euro-150TE Flexy User Manual

PROGRAMMING THE CASH REGISTER
way, that is, when programming the price for the first product, press the
shift to programming the price of the second item.

Jumping to a specific product item

If we want to change a parameter, for example, for the 25th PLU item, this can be done as follows:
Sequence of steps
Set the cash register to the P-mode for programming product items; the
setting of a price for the first product item is displayed:
Enter the number of the item you wish to jump to; in our case the 25th,
and press the button
Cash register jumps to the programmed price for the PLU no. 25
SURCHARGES AND DISCOUNTS
note:
Prior to programming, read the „General procedure when programming in P mode", which is located at the begin-
ning of the chapter „Programming the cash register".
Table 3.11 – parameters for programming surcharges and discounts
Parameter name
1.Surcharge rate
2.Surch. limit
3.Discount rate
4.Discount limit
The parameters "Surcharge limit" and „Discount limit" also determine the possibility of using a value surcharge,
or discount respectively. This means that if you want to forbid the use of value surcharges/discounts, it is
necessary to set the limit of percentage surcharge/discount to value 0.

SYSTEM PARAMETERS

note:
Prior to programming, read the „General procedure when programming in P mode", which is located at the
beginning of the chapter „Programming the cash register".
34

(PLU)
Surcharge/Disc.
Default setting Range
0.00 0.00-100% Programmed value of percent surcharge
0.00 0.00-100% Limit for manual entry of surcharge during sale
0.00 0.00-100% Programmed value of percent discount
0.00 0.00-100% Limit for manual entry of discount during sale
System params
P-mode
Description
P-mode

PRICE key and you'll automatically
Display
0001.PLU-price
0001.PLU-price
0025.PLU-price
0.00
25.00
0.00