PROGRAMMING THE CASH REGISTER
The cash register only prints lines of a text logo which contain characters (a space is also considered as a
character). Lines left empty will not be printed. Delete a line by pressing the key
GRAPHIC LOGO
Programming of a graphic logo in the cash register can be done with the use of communication software
accessible at www.elcom.eu or using the function Import from an SD card.
or with help of the Import function from SD card.
Print logo:
* method of editing – use arrow keys
Graphic logo parameters:
•
bmp format
•
bit depth 1bit (black and white, without shading)
•
maximum logo size for Euro-150TE Flexy is 360 x 240 dots and for Euro-150TX Flexy is 240 x 240
dots (with a lower resolution graphic logo the maximum size is not filled in)
Printing of a graphic logo can be switched off by pressing the key
subsequently it is necessary to confirm the setting by pressing
on "yes" and the logo has not been programmed in, no graphic logo will be printed on the receipt.
PROGRAMMING CASHIERS
note:
Prior to programming, read the „General procedure when programming in P mode", which is located at the begin-
ning of the chapter „Programming the cash register".
The cash register allows the recording of financial operations for ten independent cash registers. Programming
of cash registers is made up of nine programmable types of data:
Table 3.8 - parameters for programming of cashiers
Cashier
Cashier
Name
password
10
4
characters
characters
Programming of passwords for cashiers enables a unique password to be created for each cashier, who can
then use it to log into the cash register and thus use the individual functions of the register. After logging in
of a specific cashier, a receipt will be printed out with the cashier's name and all operations then performed
will be recorded under that name.
note:
If the name of the current cashier is changed, it is necessary to perform a logging out and repeat the log in so
that the change will be reflected on the receipts.
30
no
or
Cashier
Cash.
Cash.
Cash.
X mode
Z mode
P mode
yes
yes
yes
no
no
no
TOTAL. If printing a graphic logo is set
P-mode
Cash.
Cash. R:
T mode
Return
yes
yes
no
no
PERCENTAGE SALE.
in the menu for the graphic logo,
Cash. R:
Cash. R:
Void.
%+/-
yes
yes
no
no
Need help?
Do you have a question about the Euro-150TE Flexy and is the answer not in the manual?