Table of Contents
Advertisement
Controller with a 10GbE card
1. Option card 10GbE ports
2. Built-in 1G ports
On a 10GbE system, only the 10GbE interfaces are bonded in the Configuration setup. The 1GbE ports
can be put in a separate bond later. The 10GbE and 1GbE interfaces must be on different subnets but
can be used simultaneously by assigning different traffic types to the bonds.
Controller with a 10GBase-T card
1. Option card 10GBase-T ports
2. Built-in 1G ports
On a 10GbE system, only the 10GbE interfaces are bonded in the Configuration setup. The 1GbE ports
can be put in a separate bond later. The 10GbE and 1GbE interfaces must be on different subnets but
can be used simultaneously by assigning different traffic types to the bonds.
Install the hardware
31
Advertisement
Table of Contents
Need help?
Do you have a question about the StoreVirtual 3200 and is the answer not in the manual?