Install The 9000 Gc Control Wiring; Remove The 9000 Gc Cover - Agilent Technologies G7050A Installation And Setup Manual

Install the 9000 GC Control Wiring

Remove the 9000 GC cover

Materials needed
•
•
Procedure
1 Completely loosen the two captive screws securing the GC Left Side Cover to the GC.
Figure 30.
2 Slide the GC Left Side Cover back, tilt the top away from the GC, and remove the cover.
G7050A - Reference Compound Introduction Valve
Screwdriver, Torx T-20
GC Wiring Harness (Figure 1
GC Left Side Cover removal
item 2)
Captive screws
23