Installing The Control Module - Agilent Technologies 1100 Series User Manual

WA RN IN G
Figure 13
CAN connector
Working with the Control Module

Installing the Control Module

Installing the Control Module
The CAN connectors are similar to LAN adapter connectors. Do not insert LAN
connectors into the CAN or vice versa, since the CAN uses 24 V and might blow
up the LAN card.
Connect the CAN (controller area network) connector of the control module cable to
one of the two CAN connectors on one of the Agilent 1100 Series modules.
Connecting the CAN Connector to Rear Panel
34