Miele DG 6600 Operating And Installation Instructions page 98

Frequently asked questions
Problem
After moving house the
appliance no longer
turns from the heating-
up phase to the cooking
phase.
During operation, an
unusually large amount
of steam escapes or
steam escapes from
parts of the steam oven
where it does not usual‐
ly.
A whistling sound is
heard when the appli‐
ance is turned on again.
The and
Start at
functions have not
worked.
The oven lighting does
not come on.
F 44
and other fault codes
F
98
Possible cause and solution
The boiling temperature of the water has changed as
the altitude of the new location for the appliance dif‐
fers from the old one by at least 984' / 300 m.
 To adjust the boiling temperature, you need to
descale the appliance (see "Cleaning and care -
Descaling").
The door is not properly closed.
 Close the door.
The door seal is not correctly fitted.
 If necessary, press it in all the way round the door
to make sure it is fitted evenly.
The door seal is damaged, e.g. cracked.
 Contact Miele Service.
When the door is closed, the pressure has to equal‐
ize, which can cause a whistling sound. This is not a
fault.
Ready at
The oven cavity temperature is too high, e.g. after a
program has finished.
 Leave the door open to cool down the oven cavity.
These functions are not generally available with
Cooking
The lamp needs to be replaced.
 Contact Miele Service to have the lamp replaced.
Communication fault
 Turn the steam oven off and then back on again
after a few minutes.
 If the same message appears again, contact Miele
Service.
Technical fault
 Turn the appliance off and contact Miele.
and .
Descale
Menu