Units; Custom Units; Custom Conversion Factor - Siemens FST020 Function Manual

Setup
3.3 Totalizers
3.3.1.2

Units

Description
Select units for displayed Totalizer 1. The set of units depends on the selected process
value. Units are not applied at communication interface.
Setting
Default
Related
Path
3.3.1.3

Custom units

Description
User specific string to define custom unit Totalizer 1 values.
Setting
Default
Related
Path
3.3.1.4

Custom conversion factor

Description
Conversion factor for user specific standard mass flow values related to SI kg.
Setting
Default
Related
Path
58
Process value = Mass flow: g (grams); kg (kilograms); t (1 t = 1000 kg); STon (1 STon =
2000 lb); T (1 T = 2240 lb); oz (ounces); lb (pounds); Process value = Volume flow: l (li-
ters); hl (hectoliters); m³ (cubic meters); gal (US gallons); i.gal (Imperial gallons); BBL31.5
(1 barrel = 31.5 US gallons); BBL31 (1 barrel = 31 US gallons); BBL42 (1 barrel = 42 US
gallons); in³ (cubic inches); ft³ (cubic feet); yd³ (cubic yards);bush (bushels); Process value
= Standard volume flow: Nl (normal liters); Nm³ (normal cubic meters); Sl (standard liters);
Sft³ (standard cubic feet); Sm³ (standard cubic meters); custom units (see Custom units /
Custom conversion factor)
kg (kilograms)
Setup → Totalizers → Totalizer 1 → Units
-
-
Setup → Totalizers → Totalizer 1→ Custom units
-
1.0
Setup → Totalizers → Totalizer 1 → Custom conversion factor
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA