Custom Conversion Factor; Decimal Places; Alarm Warning Limits - Siemens FST020 Function Manual

3.2.5.3

Custom conversion factor

Description
Conversion factor for custom Density values based on SI density units kg/m
Setting
Default
Related
Path
3.2.5.4

Decimal places

Description
Sets the decimal places for the process value displayed in the local display.
Setting
Default
Related
Path
3.2.5.5

Alarm warning limits

3.2.5.5.1 Upper alarm limit
Description
If density value exceeds this limit an alarm is triggered.
Setting
Default
Related
Path
3.2.5.5.2 Upper warning limit
Description
If density value exceeds this limit a warning is triggered.
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
1.0
Setup → Process values → Density → Custom conversion factor
Auto; No decimal place; 1 decimal place; 2 decimal places; 3 decimal places; 4 decimal
places; 5 decimal places; 6 decimal places
2 decimal places
Setup → Process values → Density → Decimal places
0.00 kg/m³ to +10000.00 kg/m³
900.00 kg/m³
Setup → Process values → Density → Alarm and warning limits → Upper alarm limit
Setup
3.2 Process values
.
3
51