Process Events (4); Totalizer Events; Device Events - Siemens FST020 Function Manual

Related
The selected events will be shown in the display when they occur. Furthermore, they will be
indicated on the output if Output (2), Input/output (3) and/or Input/output (4) is set to Status
output and Status mode is set to Alarm item.
Path
4.2.7.6

Process events (4)

Description
Various sensor alarms can be enabled to show in the display and on the output if they occur.
Setting
Default
Related
The selected events will be shown in the display when they occur. Furthermore, they will be
indicated on the output if Output (2), Input/output (3) and/or Input/output (4) is set to Status
output and Status mode is set to Alarm item.
Path
4.2.7.7

Totalizer events

Description
Various sensor alarms can be enabled to show in the display and on the output if they occur.
Setting
Default
Related
The selected events will be shown in the display when they occur. Furthermore, they will be
indicated on the output if Output (2), Input/output (3) and/or Input/output (4) is set to Status
output and Status mode is set to Alarm item.
Path
4.2.7.8

Device events

Description
If one of the selected events appears this affects the status icon, the related status output
and the alarm on the communication interface.
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
Maintenance and diagnostics → Diagnostic events → Enable alarms → Process events (3)
Various process alarms selectable
-
Maintenance and diagnostics → Diagnostic events → Enable alarms → Process events (4)
136 Totalizer 1 above alarm limit; 137 Totalizer 1 above warning limit; 138 Totalizer 1 be-
low warning limit; 139 Totalizer 1 below alarm limit
Maintenance and diagnostics → Diagnostic events → Enable alarms → Totalizer events
Maintenance and diagnostics
4.2 Diagnostic events
133