Dimension Drawings; Compact Mounting Units - Siemens SIWAREX WL230 Equipment Manual

Dimension drawings

8.1

Compact mounting units

• The compact mounting unit is supplied in the installation state.
• The top plate is set 3 mm higher than in the operating state. The load cell is not loaded and
protected against an overload due to the assembly.
Figure 8-1
Figure 8-2
• In the operating state, a built-in load cell is loaded.
• The top plate moves freely in all directions.
SB-S SA
Equipment Manual, 12/2020, A5E02390707B-03
Installation state with installed load cell 0.5 to 2 t, dimensions in mm
Installation state with installed load cell 5 t, dimensions in mm
8
41