Medium Temperature; Simulate Alarms; Simulation Mode - Siemens FST020 Function Manual

Setting
Default
Related
Only if Kinematic viscosity is marked in Enable simulation, then the setting of this parameter
will be relevant.
The range and default setting are dependent on the selected Unit.
Path
4.8.2.8

Medium temperature

Simulation value
Description
Set the Medium temperature value to be simulated.
Setting
Default
Related
Only if Medium temperature is marked in Enable simulation, then the setting of this
parameter will be relevant.
The range and default setting are dependent on the selected Unit.
Path
4.8.3

Simulate alarms

4.8.3.1

Simulation mode

Description
The alarm simulation mode can be configured in this parameter.
Setting
Default
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA
The range is shown as minimum and maximum values in the HMI.
0.000001 m /s
2
Maintenance and diagnostics → Simulation → Simulation process values → Kinematic vis-
cosity → Simulation value
-273.0 °C (-459.399994 °F) to +400.0 °C (752.0 °F)
20.0 °C (68 °F)
Maintenance and diagnostics → Simulation → Simulation process values → Medium tem-
perature → Simulation value
Off; Simulate alarm (ID number); Simulate alarm class
Off
Maintenance and diagnostics
4.8 Simulation
165