Number Of Pulses To Be Transmitted; Minimum Ringdown Delay; Electronic Time Delay - Siemens FST020 Function Manual

Setup
3.1 Sensor settings
Related
Path
3.1.11.2

Number of pulses to be transmitted

Description
The number of pulses to configure optimum signal processing.
Access level: Expert user only.
Setting
Default
Related
Path
3.1.11.3

Minimum ringdown delay

Description
The minimum ringdown delay is needed for optimized signal processing.
Access level: Expert user only.
Read only.
The minimum ringdown delay setting for optimized signal processing is: 2000.000122 μs
3.1.11.4

Electronic time delay

Description
The time delay induced by the DSL electronics.
Access level: Expert user only.
Read only.
The time delay induced by the DSL electronincs is: 0.519 μs
36
Setup → Sensor settings → Miscellaneous → Preamplifier Setting
1 to 10
5
Setup → Sensor settings → Miscellaneous → Number of pulses to be transmitted
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA