Maintenance and diagnostics
4.7 SensorFlash
4.7
SensorFlash
4.7.1
Eject
Description
Eject Sensor Flash card
Setting
Default
Related
Path
4.7.2
Installed (read only)
Description
Shows the status of the SD card.
Setting
Default
Related
Path
4.7.3
Capacity total (read only)
Description
Total capacity of installed SensorFlash.
Shows INSERT CARD if card is not installed.
Setting
Default
Related
Path
156
Cancel; Ok
Cancel
Maintenance and diagnostics → SensorFlash → Eject
SensorFlash not installed; SensorFlash installed; SensorFlash used as mass storage de-
vice
SensorFlash installed
Maintenance and diagnostics → SensorFlash → Installed
GB
Maintenance and diagnostics → SensorFlash → Capacity total
FST020 Function manual
Function Manual, 09/2017, A5E42949526-AA