Loading And Unloading With Forklift - Haulotte optimum 8 Operator's Manual

OPTIMUM 8 - OPTIMUM 1931 E
D
- Operation instructions
5.9 - L
OADING AND UNLOADING WITH FORKLIFT
• Lower the platform.
The machine must be in the fully stowed transport
position.
• Ensure that the machine controls are in the OFF
position.
• Forklift used to load and unload must have adequate
capacity (Refer to
specifications).
• Adjust the forklift forks spread to match with the
machine fork pockets.
• Carefully insert the forklift forks in the designated
machine fork pockets.
Never place yourself below or too close to the machine during loading.
A wrong move can lead to machine tipping over and may cause serious injuries and material damage.
Unloading
• Carefully lift the machine and make sure that the machine weight is properly balanced.
• Slowly lower the machine and place it on the ground.
4000415480
Section B 4 Technical
E 01.18 USA / GB 83
A
B
C
D
E
F
G
H
I