Loading And Unloading With Forklift - Haulotte STAR 10 Operator's Manual

STAR 10 - STAR 26J
D
- Operation instructions
5.9 - L
OADING AND UNLOADING WITH FORKLIFT
• Lower the mast and jib.
The machine must be in the fully stowed transport
position.
• Ensure that the machine controls are in the
OFF position.
• Forklift used to load and unload must have
adequate capacity (Refer to
Technical specifications).
• Adjust the forklift forks spread to match with the
machine fork pockets.
• Carefully insert the forklift forks in the
designated machine fork pockets.
Never place yourself below or too close to the machine during loading.
A wrong move can lead to machine tipping over and may cause serious injuries and material damage.
Unloading
• Carefully lift the machine and make sure that the machine weight is properly balanced.
• Slowly lower the machine and place it on the ground.
4001178810
Section B 4
E 10.22 USA / GB 81
A
B
C
D
E
F
G
H
I