Removing Program Protection - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 41 Monday, May 15, 2000 3:32 PM

Removing Program Protection

A
While holding down the { { { { Clear/
Stop} } } } key, press the { { { { Program} } } }
key.
B
Enter "0" with the number key.
C
Press the { { { { q q } } } } key. q q
Note
If no program number is pro-
tected, the machine returns to
the ready condition.
Program—Storing Your Print Settings in Memory
D
Select the program number you
want to remove protection from
with the number keys.
E
Press the { { { { q q } } } } key.
q q
TSLS01NE
TSLS01JE
1
TSLS011E
TSLS01JE
41