Ricoh PRIPORT JP1210 Operating Instructions Manual page 83

SilverV-gb.book Page 63 Monday, May 15, 2000 3:32 PM
SP No. Mode
87 Memory Print
88 Auto Memory/
Class
113 Resettable Count
114 CLR Resettable
Count
Changing the Settings of Service Programs
Function
Each print set or stack will contain the number of
prints you program in Memory mode.
If set to Memory, Memory mode will work.
If set to Stack, Stack mode will work.
Note
Default: 0
Adjustment value: 0: Memory 1: Stack
For details about Memory mode, see
"Memory Mode—Group Printing from Different
Originals".
In this function, the machine stops printing for 2 sec-
onds after one set of prints are completed in Memory
mode and Class mode. This gives you the chance to
separate each set when you do not have an optional
tape dispenser.
For example, you can remove prints one by one from
the paper delivery tray or insert one sheet of paper
between the prints.
Note
Default: 0
Adjustment value: 0: No 1: Yes
Used to display the total number of masters and
prints.
• M: Total number of masters
• P: Total number of prints
Clears the resettable master/print counter.
Note
Default: 0
Adjustment value: 0: No 1: Yes
P.30
3
63