How To Use User Code Mode - Ricoh PRIPORT JP1210 Operating Instructions Manual

SilverV-gb.book Page 67 Monday, May 15, 2000 3:32 PM
E
Specify the Auto Reset time. En-
ter the desired setting with the
number keys and press the { { { { q
key.
F
Press the { { { { Clear Modes/Energy Sav-
er} } } } key to leave Service Program
mode.

How to Use User Code Mode

q } } } }
q q
A
Input your assigned 3-digit user
code with the number keys, then
press the { { { { q q } } } } key.
q q
TSLS011E
B
Make your prints.
C
After you have finished, press the
{ { { { Clear/Stop} } } } key while holding
down the { { { { Clear Modes/Energy Sav-
er} } } } key.
Note
This prevents others from mak-
ing prints using your user code.
If you do not follow this step,
the machine will not request the
next user for their codes unless
the auto reset time has expired.
User Codes
3
TSLS011E
67